How much do you know about the cleaning methods for fuel burners?
We should be aware of the intensity of the flame. The higher the furnace temperature, the greater the temperature difference between the furnace and the oil flow, and the greater the heat transfer. By controlling the burner, adjusting the flame intensity will result in higher heating performance and higher temperature in the combustion chamber. Ce is related to the surface area of the furnace tube, and the larger the area of the furnace tube where the flame comes into contact with the flue gas, the greater the heat transfer of the burner; In addition, the total heat transfer coefficient is very important, and it is also very important. ACE tubes are very important. The higher the heat transfer coefficient, the more reasonable the furnace structure and the more heat exchange.
When operating the fuel burner, the fan current should be checked regularly to avoid overcurrent burning out the fuel burner. The space of the fuel burner should be kept clean and free of floating debris to prevent it from being sucked into the fan and blocking the gas supply channel of the fuel burner. Burners and electronic control cabinets must not be submerged in water to prevent electric leakage and injury to people. The gas contains impurities such as tar, which may adhere to the inner walls of gas pipelines and valves during transportation. Fuel burner operators should promptly remove carbon deposits in pipelines and valves to avoid accidents caused by loose valve closure. Before the fan sweeps the furnace, it is strictly prohibited to place torches or high-temperature objects inside the furnace to avoid explosion accidents. Performance advantages and maintenance issues
A fuel burner is a heating device that burns a certain proportion of liquid (petroleum, diesel, etc.) and air. It is a commonly used combustion device. Due to their types and application scope, they can be divided into three types: special burners, civilian burners, and industrial burners. If used for a long time, it will inevitably lead to some problems, such as firefighting.
Release the hinge shaft of the fuel burner, open the burner head, wipe the burner components with a cleaning agent or cloth, check and adjust the spacing between the combustion rods, wipe the flame detector with a clean soft cloth, and carefully clean the air duct and fan impeller.
1. Personnel unrelated to debugging operations must leave the work site.
2. Prohibit any other operations (such as welding, gas cutting, etc.)
3. To ensure the personal safety of debugging personnel, when igniting the burner, the flame should be one meter away from the side of the burner. When the flame burns steadily, the flame can be observed in the observation mirror and adjustments such as the next output adjustment can be made.